The Tee Clip® V.V | Patent-Pending Magnetic Golf Tee Holder for Hat

The first and only patent-pending magnetic golf tee holder system for your golf hat. Hand-crafted in-house in Southern California from USA-sourced, 18-gauge 304 Stainless Steel (#4 brushed finish), The Tee Clip® V.V Premium Kit gets sharp tees, divot tools, and ball markers out of your pockets—eliminating poked fingers, torn apparel, and pulling pocket linings inside-out with a gloved hand.

The 5 Pillars of V.V Engineering

1. Patent-Pending Magnetic System: Features dual linear neodymium magnets embedded and extending through the symmetrically aligned two-piece 304 stainless steel body—delivering an extreme magnetic hold that stays on your hat when you don't need it and removes effortlessly when you do.
2. Hand-Made Natural-Tension Barrels (Patent-Pending): Two hand-made, custom-shaped 304 stainless steel barrels hold your golf tees mechanically using natural physical tension—with zero springs, clamps, velcro straps, rubber grommets, or stitched pockets. A simple 1/4-turn unlocks or relocks any standard wood tee or our FlatBack polymer tees. Placed behind your golf ball on the green, the dual barrels also act as an extension scope to help visualize your putting line.
3. Proprietary Duo Clip V.V Dual-Magnetic Hat Clip (Patent-Pending): Crafted from 18-gauge 304 stainless steel (#4 finish), the Duo Clip V.V holds The Tee Clip on the top surface of your brim using two press-fit linear neodymium magnets that protrude by 0.3mm—creating a natural auto-correct alignment so The Tee Clip always lays flush. Underneath the brim, an embedded circular neodymium magnet in the tang holds our included Signature Hand-Stamped 18mm Tee Clip® Ball Marker.
4. Removable Cut-From-Body Magnetic Divot Tool (Patent-Pending): Our divot tool does not swing out. Laser-cut directly from the body, it is held flush in its base recess via a neodymium magnet in the divot tool and a matching magnet hidden in the surface of the face of The Tee Clip upper body (2.2 lb magnetic hold). Remove it completely, turn it 180 degrees, and reconnect it with the magnet while locking it into the central notch to hold the full body in your hand as a larger, easier-to-grip divot tool.
5. 24-Hour Citric Acid Passivation Bath: Every unit is scrubbed free of exposed iron dust with acetone and a nylon brush, submerged in a 24-hour citric acid bath, and hung dry for 24 hours to form an invisible, nanometer-thick, self-repairing chromium oxide layer that prevents rust from sweat, oils, or turf chemicals.

What’s Included in the Gold Tin (1.5 oz Total System Weight): The Tee Clip® V.V, Duo Clip V.V, Cut-From-Body Magnetic Divot Tool, Signature Hand-Stamped 18mm Tee Clip® Ball Marker, two (2) 3-3/4" Tee Clip® Professional Wooden Golf Tees, and a presentation Gold Tin with custom-cut foam insert.